Page
18
Electric Oven
User Manual
Rack Positions:
It is important to place the wire grill into the oven properly. DO not
allow wire rack to touch rear wall of the oven. Rack positions are
shown in the next figure. You may place a deep tray or a standard tray
in the lower and upper wire racks.
Installing and removing wire racks
The remove wire racks, press the clips shown with arrows in the figure, first remove the lower, and
then the upper side from installation location. To install wire racks; reverse the procedure for
removing wire rack.
Replacing oven lamp
WARNING:
To avoid electric shock, ensure that the appliance circuit is open before changing the
lamp. (Having circuit open means power is off).
First disconnect the power from the appliance and ensure that the appliance is cold. Remove the
glass protection by turning as indicated in the figure on the left side. If you have difficulty in
turning, then using the plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with the same specifications.
Reinstall glass protection, plug the power cable of appliance into electrical socket and complete
replacement. Now you can use your oven.
Type G9 Lamp
220-240 V, AC
15-25 W
Figure 13
220-240 V, AC
15 W
Figure 14