pg
8
www.tisira.com
| tisira
InsTallaTIOn
IMPORTANT //
The panels of the adjoining furniture should be heat resistant. Particularly
when the adjoining furniture is made of veneered wood, the adhesives should be able to
withstand a temperature of 120°C. To comply with safety regulations, once the appliance has
been fitted it should not be possible to make contact with the electrical parts. All parts, which
offer protection, should be fixed in such a way that they cannot be removed without the use
of a tool.
To ensure that the oven works as intended it is important to install the unit as shown in the
diagram and allow enough airflow to enable to ovens cooling system to perform.
Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting
screws into the 4 holes that can be seen in the frame of the oven when the door is open.
IMPORTANT //
The first time you switch the oven on, some smoke may appear. These are
the coatings used to protect your appliance during transport and storage. There is nothing
unusual about this. If it happens, simply wait until the smoke disappears before putting any
food in the oven. Never roast or bake on the base of the oven.
70
70
70
A
A
A
A
A
A
