pg
15
tisira |
www.tisira.com
3 BUTTOn
DIGITal TImer
The operation of this timer is done using 3 buttons. The functions of the buttons are:
With this arrangement it is possible to select the following four functions:
Minute counter
Operation period
Operation stop
Time-of-day
These modes can be selected by repeatedly pressing the mode button. The desired time for
minute counter, operation period, operation stop or time-of-day can be set with the “+” and
“-“ buttons.
TIME OF DAY
When connected to mains supply the display shows 12.00 o’clock and the “Time” LED flashes.
As long as it is flashing, it is possible to adjust the time via the plus and minus buttons. Once
the time is adjusted, it is stored approx. 5 seconds after the last operation, the “Time” LED
goes dark again. It is possible to adjust the time-of-day by pressing the mode button until
“Time” LED flashes, then the time-of-day can be adjusted.
MINUTE COUNTER (INTERVAL TIME)
In order to set the interval time, the “Mode” button has to be pressed repeatedly until “Minute
Counter” LED is flashing. Then the interval time can be set between 0.01 and 2.30 h by using the
plus and minus buttons. After setting the interval time, it remains displayed and the “Minute
Counter” LED is now illuminated steadily. After the interval time has run down, the alarm signal
MINUTE
COUNTER
COOKING
TIME
END
TIME
MODE
SUBTRACT
TIME
ADD
TIME
TIME
