Tisira TFCM629WE, User Manual, Page: 9 / 28

pg 8 pg 9
www.tisira.com | tisira
tisira | www.tisira.com
ADJUSTING THE SHELF/TRAY
POSITION
When adjusting or positioning your shelf,
please ensure the following:
1. Ensure that the shelf / tray is located
between the two wire sideracks. (See
point 1)
2. The shelf stops should be facing
downwards and towards the rear. (See
point 2)
3. The guard rail should always be located
at the rear of the oven (See point 3)
IMPORTANT //
Prior to first time use,
it is recommended that you select the
Conventional Cooking function and set it to
work at its highest temperature (250ºC) for
half an hour without anything inside the oven
and with its the door shut. At the end of this
process, open the oven door and leave it
open for a few minutes to allow fresh air to
circulate inside the oven.
This procedure will remove the
unpleasant odour that is caused by
bonding agents used to protect the oven
cavity during the enamel coating stage.
NOTICE // Your oven is equipped with a
thermostatically controlled cooling fan
that will switch on when required to cool
the oven. This fan may continue to run
even after the oven is switched off, but it
will automatically turn off when the cavity
is sufficiently cool. Warm air is discharged
from the front of the oven during the
cooling process.
USING THE THERMOSTAT CONTROL
• Set the temperature by turning the
thermostat control to the desired level.
• When a temperature is selected,
thermostat light will illuminate.
• When the selected temperature is
reached, the light will turn off.
ATTENTION // During use, the appliance
becomes hot. Care should be taken to avoid
touching heating elements inside the oven.
NOTE // Never line the oven with
aluminium sheets as this can cause
damage to the enamel.
OPERATING
INSTRUCTIONS
INSTRUCTIONS FOR USE OF OVEN