TIS X-5S1Z-AMP Installation Manual Download Page 8

INSTALLATION MANUAL

MODEL: 

AMP-5S1Z-MTX

TIS CONTROL LIMITED

RM 1502-p9 Easey CommBldg

253-261 Hennessy Rd Wanchai

Hong Kong

TEXAS INTELLIGENT SYSTEM LLC

SUITE# 610. 860 NORTH DOROTHY DR 

RICHARDSON

TX 75081.USA

Copyright © 2020 TIS, All Rights Reserved

TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the 

United States of America. This company takes TIS Control Ltd. in other 

countries. All of the Specifications are subject to change without notice.

w w w . t i s c o n t r o l . c o m

AUDIO PLAYER 

1 Zone 5 Sources 

TROUBLESHOOTING

PRG Button Blinks Red Color 

Rapidly

Reason:

 The module’s address conflicts with another device in the TIS 

network. You need to press and hold the PRG button for 6 seconds so 

the module can get a new address.

Device PRG LED is not Blinking; 

Device not Powered

Reason: 

Device is not powered on; no TIS-BUS 24V supply connected 

to the device. 

Wall panels can’t Pair with the 

Device

Reason 1:

 TIS-BUS connection has a problem; check the wires and 

make sure there’s not a short in the connection. 

Reason 2: 

Manual programming function disabled in the device (default 

is enabled).

Wall Panels can’t Control the 

Device Channels

Reason 1:

 TIS-BUS connection has a problem; check the wires and 

make sure there’s not a short in the connection. 

Reason 2:

 Programming address is wrong. 

No sound on connected 

speakers

Reason 1:

 Check the speakers’ wires connection.

Reason 2:

 The volume control is set to minimum.

Track name is not appearing

Reason:

 The MP3 file name is not written in Standard English letters or 

numbers.

When track finishes, it will 

not play the next track 

automatically

Reason:

 The device’s play mode is set to “play once” option; change it 

to play all.

Radio signal is weak

Reason:

 The antenna wire in the metal encloser or inside indoor area 

has weak signal coverage.

When sound is amplified, it is 

interrupted.

Reason 1:

 A 24V power supply is not enough. It is better to use a 24V 

2.5Amp power supply.

Reason 2:

 Too many speakers are connected in a such way that their 

ohms do not fit with amplifier ohms. 

Summary of Contents for X-5S1Z-AMP









Reviews: