clean wheel solutions
GmbH
22
7
H
an
d
lin
g
a
n
d
B
eh
av
io
r
D
u
ri
n
g
O
p
er
at
io
n
Initial and Follow-up Operation
Starting cleaning
Press the "60s" button for lightly soiled,
"120s" button for normally soiled and
"180s" button for heavily soiled rims.
The washing program will now run automatically. The material and environmentally friendly
ultrasonic cleaning technology, combined with the wheel rotation ensure extremely clean wheels
without additional manual work. It is also an active contribution to environmental protection.
Caution: Good washing results only
with setpoint temperature and degassed water!
After completing the ultrasonic cleaning process,
the clean wheel will automatically be lifted out of
the washing bath. Let the wheel drip off and swing
outwards by hand. By pressing the button <Down>
move into the lowest position and wind down the
wheel.
When handling wet wheels
wear hand protection!
Use suitable gloves made of PVC!
Use a skin protecting
agent before and after
washing a wheel.
Extras: Semiautomatic
The semiautomatic mode allows the machine to be
operated by using only one button. To simplify operation,
the button is installed at knee height.
Here, the steps of procedure are systematically and
automatically performed as follows:
wheel clamping - wheel lifting - lowering of wheel and start
of cleaning - wheel lifted out of the water - wheel lowered -
clamping device loosened.
7. Handling and Behavior During Operation