clean wheel solutions
GmbH
14
5
S
af
et
y
In
st
ru
ct
io
n
s
Specific Safety Instructions and Frequently used Symbols
The following operating manual safety instructions point out unavoidable residual risks that may arise
while operating the wheel washing machine.These residual risks include danger for:
· People
· Product
· Environment
The symbals used in this operating manual are primarily intended to call attention to the safety
instructions!
The primary purpose of these safety instructuins is to prevent personal injuries.
The respective safety symbol does not replace the corresponding text. Therefore, always
read the entire text carefully!
When using the ultrasonic mode don't reach into the water bath.
(liquid approx. 50°C hot)
Wear protective PVC gloves.
Use a skin protecting agent before and after operating the wheel washing machine.
Warning of dangerous electrical voltage.
Before opening the controle cabinet make sure the main switch is at „0“ and
secure it from being switched back on again.
(if necessary disconnect the power cord)
During the lifting, lowering and pivoting process no person may remain
in the working area of the wheel dolly! On completing the work process,
swing the pivot arm outside the basin in an upright position.
Dispose sewage through internal sludge tank or light fluid seperator.
This symbol does not refer to any safety instructions but
offers important notes for better understanding of the machine funktions
and its operation.
Wear hearing protection.
Danger of crushing.
i
Hinweis
5. Safety Instructions