Caution:
The filled machine is not allowed to be switched off if installed on a site prone to frost.
Alternatively drain the water! Damage due to frost is born by the customer.
i
Note
clean wheel solutions
GmbH
17
7
H
an
d
lin
g
a
n
d
B
eh
av
io
r
D
u
ri
n
g
O
p
er
at
io
n
Assembly and Mounting
7. Handling and Behavior During Operation
Place the machine in the intended position and align
the tank horizonatally using the integrated bubble
tube.
Mount the cable tube on the back board using the
available screws.
Ensure that the cable tube is not twisted!
It is important to ensure that the cable conduit (a) can move freely
and is not obstructed by other objects.
The cable tube (b) on the back board is not a stop and must not be
mechanically stressed!
Connect to power supply and pessurized air.
a
b