manualshive.com logo in svg

TIPTEL Ergophone C, Programming Instructions Manual

Share
Download
TIPTEL Ergophone C Programming Instructions Manual Download Page 39

38

Programming

Set display language

The messages and information shown in the display can be set to different languages, i. e. 

German, English, Netherlands or French. 

  

#

        Press the P key and afterwards, press the # key (longer than 1 sec.).  

     

Enter 4-digit-PIN. 

     

Enter 

     

code 630 for German    or 

     

code 631 for English     or 

     

code 632 for Netherlands  or 

     

code 633 for French.

 

  

Press the P key. The setting is stored.

Activate/deactivate headset operation

If you want to use a headset instead of a handset, you have to set the operation mode 

correspondingly. 

  

#

        Press the P key and afterwards, press the # key (longer than 1 sec.).  

     

Enter 4-digit-PIN.

     

Enter 

     

code 620 for „handset operation“   or 

     

code 621 for „headset operation“.

   

 

Press the P key. The setting is stored.

Recording of call passages

You can initiate the temporary two-way conversation recording by pressing speed dialling 

key 5 (see user manual). You need to assign this function to speed dialling key 5 by the 

following procedure. Afterwards, this key cannot be used for speed dialling anymore as it is 

then exclusively reserved for temporary two-way conversation recording. 

  

#

        Press the P key and afterwards, press the # key (longer than 1 sec.).  

     

Enter 4-digit-PIN.

Summary of Contents for Ergophone C




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands