18
Programming
Press the P key. Your entries are stored. You can now enter the
three-digit function code of another function or press the P-key again
to exit the programming menu.
General information on the programming process:
- If you enter a “wrong key” (related to the corresponding function) during the program-
ming process, the procedure is aborted without saving the changes.
- You can interrupt the programming process without saving the changes by lifting and
replacing the handset.
- If you do not press any key for 40 seconds while you take out a specific programming
step, the procedure is aborted without saving the changes.
- When you program a telephone number under a memory location, you can enter
manual dialling pauses via the speed dialling key at the bottom (speed dialling key 5). In
the display, a pause is indicated by “P”.
- If you made a mistake when entering the telephone number, just use the redial button to
erase it.
Store speed dialling numbers
You can assign a maximum of 5 telephone numbers to the speed dialling locations. Each
of these numbers is restricted to a length of 20 digits as a maximum.
Please be aware that you can also assign functions to speed dialling stations 1, 2 and 5
(instead of telephone numbers, see page 10).
#
Press the P key and afterwards press the # key briefly.
Select code for the desired speed dialling station and enter it:
Code 01 for speed dialling location 1
Code 02 for speed dialling location 2
Code 03 for speed dialling location 3
Code 04 for speed dialling location 4
Code 05 for speed dialling location 5
Enter telephone number.
