36
Programming
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter
code 430 for „no dialling restriction“
or
code 431 for „direct call ON“ or
code432 for „restricted numbers ON“ or
code 433 for „full restriction ON“
Press the P key. The setting is stored.
Basic settings
PIN (personal identification number)
You can protect the settings programmed at your telephone against unauthorised or unin-
tended changes by assigning a PIN. In the factory pre-set, the PIN (personal identification
number) is „0000“. If you change the PIN, please make sure that you do not forget this
code as it is used as an „access key“ to the programming level of your telephone.
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 600.
Enter new PIN.
Enter new PIN again as a confirmation.
Press the P key. The setting is stored.
CAUTION
Should you have forgotten your PIN, it can only be reset to the factory
pre-set by the manufacturer. Ask your dealer.
Entering the police/fire service numbers for a specific country
The phone numbers for police and fire service specific to each country should be saved so
that, in case of an emergency, dialling these numbers can be done, even if the dialling re-
