TIPTEL easyBASE 28 plus, Operating Instructions Manual, Page: 45 / 52

19
3 Programming mode
UK
Function Parameter code Inputs
3.2.17 Parameter query
Parameter display 51 #
A handset can be used to read the current setting for different para-
meters. After entering the relevant parameter code and confirming this
with
#
, replace the telephone receiver. You will then receive a call from
the tiptel easyBASE 28 plus and the parameter code and the current
status will be shown on the telephone display.
Flash time example:
Input
#95123#
=>output 23-010 => flash time
(10*10 ms = 100 ms)
Display registered handsets example:
Input
#9515#
=> output e.g. 1121314150607081 =>
handsets 1, 2, 3, 4, 8 are registered.
Display call assignment example:
Input
#95111#
=> output e.g.1136_23459 =>
line 1: subscribers 1, 3, 6 => line 2: subscribers 3, 4, 5
and hunt group call.
3.2.18 Parameter reset
Parameter reset 90 #
All parameters are reset to the factory settings, the handsets remain
registered unchanged.
3.2.19 Resetting the easyBASE 28 plus
Resetting the
easyBASE 28 plus
91 #
The tiptel easyBASE 28 plus is reset to the factory settings.
All parameters are reset to the factory settings, all handsets are de-
registered. The PIN is reset to 0000. Entries in the blacklist are deleted.