background image

29

E

N

G

L

I

S

H

TP04405 Rev. 07/16

to the original purchaser that it will make any repairs or replacements necessary to correct 

defects in material or workmanship, at no charge to you, for Tippmann Accessories for a 

period of ninety (90) days from the date of original retail sale. All Tippmann asks is that you 

properly maintain and care for the Marker and Accessories (collectively, the “Product”) and 

that you have warranty repairs performed by Tippmann or a Tippmann Certified Tech Center. 
This Limited Warranty is non-transferable, and it does not cover damage or defects to the 

Product caused by (a) improper maintenance; (b) alteration or modification; (c) unauthorized 

repair; (d) accident; (e) abuse or misuse; (f) neglect or negligence; and/or (g) normal wear and 

tear. 
Tippmann does not authorize any person or representative to assume or grant any other 

warranty obligation with the sale of this Product. 
THIS IS THE ONLY EXPRESS WARRANTY GIVEN WITH THE PURCHASE OF THIS 

PRODUCT; ANY AND ALL OTHER EXPRESS WARRANTIES ARE DISCLAIMED. THE 

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE ARE LIMITED TO THE APPLICABLE LIMITED WARRANTY PERIOD SET 

FORTH HEREIN, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, SHALL 

APPLY AFTER EXPIRATION OF SUCH PERIOD.
Some states and nations do not allow limitations on the duration of implied warranties, so the 

above limitation may not apply to you.
The sole and exclusive liability of Tippmann and/or its authorized dealers under this Limited 

Warranty shall be for the repair or replacement of any part or assembly determined to be 

defective in material or workmanship. TIPPMANN SHALL NOT BE LIABLE FOR, AND YOU 

EXPRESSLY DISCLAIM, ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL 

DAMAGES (COLLECTIVELY, “DAMAGES”) ARISING OUT OF THE SALE OR USE OF, OR 

YOUR INABILITY TO USE, THE PRODUCT. NO PAYMENT OR OTHER COMPENSATION 

WILL BE MADE FOR DAMAGES, INCLUDING INJURY TO PERSON OR PROPERTY OR 

LOSS OF REVENUE WHICH MIGHT BE PAID, INCURRED OR SUSTAINED BY REASON 

OF THE FAILURE OF ANY PART OR ASSEMBLY OF THE PRODUCT. 
Some states and nations do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you. This warranty gives you 

specific legal rights, and you may also have other rights that may vary from state to state or 

nation to nation.

Warranty and Non-Warranty Repairs

When shipping the Product to Tippmann for warranty or non-warranty repair:

1.  If you have aftermarket parts on your Marker, please test the Marker with original stock 

parts before returning the Marker for service or repair. 

2.  Always unload (page 10) and remove the air/CO2 supply from the marker (page 15). Do 

not ship the air/CO2 supply cylinder if it is not completely empty.

3.  Ship the Product to the Tippmann address identified. 

4.  You must pre-pay postage and delivery charges. 

5.  Provide the date of purchase for the Product. 

6.  Briefly describe the repair requested.

7.  Include your name, return address and a telephone number where you can be reached 

during normal business hours, if possible. 

Tippmann makes every effort to complete its repair work within twenty-four (24) hours of 

receipt. Tippmann will return the Product to you via regular ground UPS. If you wish to have 

it returned using a faster service, you can request NEXT DAY AIR UPS OR SECOND DAY 

AIR UPS, but you will be charged for this service and must include your credit card number 

with the expiration date. Your credit card will be charged the difference in additional cost over 

regular ground shipping service.

Summary of Contents for M4 Carbine































Reviews: