background image

28

E

N

G

L

I

S

H

TP04405 Rev. 07/16

Specifications

Model ........................................................................................

TIPPMANN

®

 M4 Carbine

Caliber .......................................................................................................................... .68 inch
Action ................................................................................ Open Bolt Blow Back Valve System
Air Supply .............................................................................Compressed air, nitrogen, or CO2
Ball Feed ...........................................Gravity (Hopper) or 20 round Spring Assisted Magazine
Trigger  ....................................................................................... Semi-Automatic (Mechanical)
Barrel Length ......................................................................................................... 12” / 30.5cm
Length (no air cylinder, stock fully collapsed) ........................................................ 27” / 68.5cm
Length (no air cylinder, stock fully extended) ........................................................ 30” / 76.2cm
Effective Range ..................................................................................... 150+ feet / 46+ meters
Weight (Hopper fed, without air supply cylinder)  ...................................3 lbs 15 oz. / 1.785 Kg
Weight (Magazine fed, without air supply cylinder)  ......................................... 4 lbs / 1.838 Kg
Finish ............................................................................................... Flat Black Powder Coated
Velocity ......................................................................................................................Adjustable
Always measure your marker’s velocity before playing paintball and never shoot at velocities in 

excess of 300 feet (91.44 meters) per second. See 

Velocity Adjustment

 instructions on page 10.

Warranty and Repair Information

TIPPMANN SPORTS, LLC (“Tippmann”) is dedicated to quality paintball products and 

outstanding service. In the unlikely event of a problem with this Tippmann paintball marker 

(“Marker”) and/or Tippmann accessories (“Accessories”), Tippmann’s customer service 

personnel are available to assist you. For customer service and/or other information, please 

contact:

 

Tippmann Sports, LLC

 

Tippmann Sports Europe, SPRL

 

2955 Adams Center Road 

Rue du Mont D’Orcq 16

 

Fort Wayne, IN 46803 

Z.I. Tournai Ouest, 7503 Froyennes, Belgium

 

www.Tippmann.com 

www.Tippmann.com

 

1-800-533-4831 

Tel32 (0) 69 549 578

Warranty Registration

To activate the Marker’s Limited Warranty, you must register the Marker within thirty (30) days 

of the date of original retail sale by:

1.  Registering online at www.Tippmann.com or 

2.  Completing the attached warranty registration card and returning it to Tippmann at the 

address above.

The Limited Warranty for Tippmann Accessories does not require activation or registration; by 

registering the Marker, you activate the warranty for the Accessories.

Limited Warranty

Tippmann warrants to the original purchaser that it will make any repairs or replacements 

necessary to correct defects in material or workmanship, at no charge to you, for the Marker 

for a period of one (1) year from the date of original retail sale. Further, Tippmann warrants 

Summary of Contents for M4 Carbine































Reviews: