WARNING:
This product should not be mounted in any
box that also has electrical products such as light switches
or outlets installed. Electrical interference from a light
switch or outlet can create unwanted background noise
on your audio signal.
IMPORTANT
:
It is not recommended to mount multiple
AZSS1’s next to each other when connecting over Wi-Fi.
Installing multiple wireless AZSS1’s near each other could
effect their ability to connect wirelessly to the MC.
DANGER:
Avoid all electrical wiring when cutting the rough
opening. Failure to do so may result in serious injury
or death.
STEP 1
Identify a place to install the AZSS1 in the wall.
STEP 2
Cut out a rough opening into the wall and install a single
gang low voltage ring and tighten it down.
STEP 3
Pull the power and other audio wires to the new audio location.
STEP 4
Locate the in-wall mounting bracket that came with the AZSS1.
Align the in-wall mounting bracket so that it lines up properly
with the front panel of the AZSS1. Locate the small screws from
the installation package. Secure the in-wall mounting bracket
to the front of the AZSS1.
STEP 5
Make all wiring connections as shown, then insert the AZSS1
with bracket into the single gang low-voltage ring.
STEP 6
With the AZSS1 securely mounted, plug the AZPS1 into an
outlet. The AZSS1 takes approximately one minute to complete
its power up cycle. The AZSS1 Installation is complete.
SPEAKER WIRING DIAGRAMS
Installation - Standard In-wall
In-wall mounting bracket
attached with small screws
Attached to single gang
low-voltage ring
with large screws
Parallel Speaker Wire Diagram
+
–
+
–
+
–
+
–
Right
Left
4 Ohm
Load
8 Ohms
8 Ohms
8 Ohms
8 Ohms
+
–
+
–
Speaker Wire Diagram
+
–
+
–
Right
Left
4 Ohm
Load
4 Ohms
4 Ohms
+
–
+
–
The AZSS1 is designed to be installed as a replacement for
existing volume controls .
When installed as a VC replacement, the speakers are
connected to the AZSS1 the same way as they were to the
VC. The Power Supply is located at the speaker home run.
The existing speaker wires going to the home run deliver
power to the AZSS1.
www.tiohome.com
8
StealthStream
®
1 Installation Guide
