www.tiohome.com
4
STEP 1
STEP 2
First Time Setup
Plug the power supply unit into the StealthStream
®
1. The indicator light on the front of the StealthStream
®
1
should turn solid blue and then shut off within 15 seconds.
STEP 3
Once the initial boot and all updates have been completed, the light on the StealthStream
®
1 should stay off. To
access your StealthStream
®
1, download the TiO Music App via the Google Play or Apple App Store depending on
your device.
Note: The TiO Music App is a separate app intended for use on standalone music systems. If you attempt to
download and use the TiO Home App instead, you will receive an error message which reads “no system found”.
STEP 4
Ensure that phone or tablet you are using is connected to your routers home network and launch the app. All
currently connected StealthStream
®
1’s should appear listed on your home screen.
Note: On first use all streamers will appear with a string of numbers in place of a device name. If setting up multiple
streamers, you will need to play or stream a music source to each in order to identify the location of the streamer
before giving them custom names below. If you do not see the connected devices, ensure that they are all currently
connected to your router and then drag down on the home screen of the TiO Music app to refresh your device list.
STEP 5
To connect to and use your StealthStream
®
1 wirelessly, perform all of the steps above. Once you are in the TiO
Music app select the StealthStream
®
1 you would like to use wirelessly. Accept the terms of service to proceed.
STEP 6
To name the device, navigate to the “settings” menu option. Select “Device Name” to enter a custom name for the
StealthStream
®
1 and select “ok”. Restart the TiO Music app to apply changes.
STEP 7
To connect the device wirelessly, navigate to the “settings” menu option. Select “Wireless Setup” and select the
wireless method you would like to use to connect to the device. Please note that for manual connections you will
need to know both the SSID and Password for your wireless network. Remove the ethernet cable from the back of
your StealthStream
®
1. The indicator light will repeat the process of flashing solid blue before turning off while it
connects to your router. Once the light on the front of the streamer remains off your device is now connected
wirelessly.
Wait a few more seconds and the indicator light should begin to flash blue, then proceed to turn solid green, and then
solid blue before turning off completely
Note: The indicator light may stay blue for several seconds or repeat the process a few times. This indicates that the
StealthStream
®
1 is downloading current updates. Allow the StealthStream
®
1 to repeat the process until the indicator
light remains off indefinitely.
StealthStream
®
1 Installation Guide
