TINY TNC-G10, Operation Manual, Page: 15 / 18

15
Operation when sensors are disabled:
Modes Modes Patterns Operations
Mode1: Feed at both
sides
1. Motor1 moves CCW.
2. Motor2 moves CCW.
3. Motor1 moves CW.
4. Same as step 1.
Mode 2: Feed at one
end only
1. Motor1 moves CCW.
2. Motor1 moves CW.
3. Motor2 moves CCW.
4. Same as step 1.
Mode 3: No feed
1. Motor1 moves CCW.
2. Motor1 moves CW.
3. Same as step 1.
Homing
Homing feature is available on key 8. If the user
presses key 8 in home screen, motors moves to
respective home positions and searches for home
sensor input. The home speed can be adjusted in
Set up screen for respective mode.