9
7. Measurement
Measuring mode MEAS
After the unit is switched on, it is automatically in the
standard measuring mode MEAS.
You can “freeze” the result shown in the display by
pressing the [Hold] key.
If you press the [Hold] key once again, the meter swit-
ches back to the continuous measuring mode.
Four display modes are supported:
Conductivity
(units – mS/cm
and
µ
S/cm)
Resistance
(unit – kOhm · cm)
Salinity
(unit – g/kg)
Total dissolved solids (TDS)
(unit – mg/l)
The conductivity mode supports 4 different measu-
ring ranges:
0,0
...
200,0
µ
S/cm
0
...
2000
µ
S/cm
0,00
...
20,00 mS/cm
0,0
...
200,0 mS/cm
When the Auto Range feature is active, the meter au-
tomatically selects the most suitable resolution.
When the Auto Range feature is inactive, you can chan-
ge to the next measuring range resolution by briefly
pressing the [Meas] key. If the highest resolution is ac-
tive when you press the key, the unit switches to the
lowest measuring range resolution.
Meas
Hold
Summary of Contents for AQUALYTIC SensoDirect CD 24
Page 22: ...22 1 2 3 14 Assembling Carrying strap...
Page 23: ...23...
