Tintometer AQUALYTIC SensoDirect CD 24, Operating Instructions Manual

Page: 8 / 24

8
When inserting the batteries, ensure correct polarity!
Screw the unit back together carefully without exer-
ting too much pressure on the gasket seal.
If the
[
∆
!
]
symbol appears together with "bAt” in the
lower section of the display, this means that the batte-
ries are nearly empty and need replacing.
However, the unit will continue to function for a certain
period of time.
If "bAt" appears in the upper section of the display,
this means that the batteries are completely empty.
Only use the matching Tintometer conductivity elec-
trodes!
Other electrodes may cause serious damage to the
meter and the electrode.
Switch off the unit before changing electrodes. Plug in
the electrode before switching the unit back on.
The unit is factory-calibrated to the supplied electro-
de. If the electrode is replaced, the unit must be facto-
ry-calibrated.
The electrode must be plugged in before the unit is
switched on.
Switch the unit on via the [ON/OFF] key.
Following measurement, please switch the unit off
using the [ON/OFF] key.
On
Off