Tinkerine Studio DittoPro-R, Setup & Operation Manual

Page: 13 / 19

Not sure if the bed calibration was done correctly?
Watch our online bed-leveling tutorial video by
scanning in the QR code on your phone or visiting
this link: https://youtu.be/GpMtpL-FfDM
12
Final Step
Print Removal
When your print is completed, it’s time to remove it from the print surface. While smaller prints can sometimes be easily removed by hand, we
recommend you to use a Print Removal Knife for removing prints.
After your print has completed, remove the glass print surface from
the printer and place down on a flat surface.
Using the Print Removal Knife, slowly wedge the knife between the
print and taped surface and lift upward. Repeat the process around
the print until you can easily pop the print off the print surface.
Print Removal