Tineco PURE ONE S15 Series, Instruction Manual

Page: 23 / 112

EN
21
16 Dust Empty Tab
17 Battery Release Button
18 Battery Indicator Light
19 Power On/Off
20 HEPA Filter
Fig.A
ACCESSORIES
Note:
• Test an accessory on a small, inconspicuous
area before use on sensitive surfaces.
• To identify what should be included with
your purchase, please refer to the “Included
Accessories” located on the packaging box.
• As shown below, there are many components
compatible with this model. If you require more
accessories, please go to
www.tineco.com or
store.tineco.com .
1. Direct-drive anti-tangle LED
power brush
Very effective for cleaning fine dust on the carpet
and hard floor without tangling caused by hairs
blocking into roller. LED headlights help you clean
the hard-to-see spots.
2. Mini power brush
For vacuuming upholstered furniture,
mattresses etc. Vacuums pet hair and removes
ingrained dirt.
3. 2-in-1 dusting brush
Switches between a wide and a soft brush by
pressing the release button. The soft brush is
most effective on hard-surface furniture while
the wide brush is effective for upholstered
furniture, curtains, etc.
4. Crevice tool
For corners, nooks, and other hard-to-reach
places such as around car seats, picture frames,
and cupboards.
5. Soft dusting brush
Angled bristles on a slender, oval-shaped rim
provide anti-static, cushioned contact. Suitable
for dusting shelves, lighting, delicate surfaces,
electronics and more.
6. Flexible long crevice tool
Easy to bend, easy to reach tight spots.
Suitable for cleaning dust behind and beneath
furniture, around refrigerators, and many other
tight gaps.
7. Multi-angle folding tube
An articulated joint makes it adjustable to allow
for flexibility when cleaning from high to low.
8. Flexible extension hose
Excellent extension and flexibility to access
hard-to-reach spaces; perfect for in-care use.
Compatible with all non-motorized Tineco
accessories.
9. Hair cleaning tool
Use the end with the small blade to remove
hair and debris wrapped around the roller.
Use the end with the brush to clean the brush
window, and the dustbin, as required.
Fig.B
ASSEMBLY
Tube Installation
• Insert tube.
Fig.C-1
• Insert to the main body.
Fig.C-2
• Press the release button to remove the tube.
Fig.C-3
Brush Installation
• Insert the power brush.
Fig.C-4
• Press the release button to remove the power
brush.
Fig.C-5