TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 5 of
6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide
Doc. No./Rev. 20170304
2.5 INTERVAL TIMER
You can set two Timers that countdown in sequence.
Interval Timer Set-Up:
a.
Press
MODE
button until INTTMR appears.
b.
Press
SET/RECALL
button. INT 1 flashes.
c.
Press
MODE
(NEXT) button. Hour digits flash.
d.
Press
START/SPLIT
(+) or
STOP/RESET
(-) button to increase or decrease HOUR.
e.
Press
MODE
(NEXT) button and press
START/SPLIT
(+) or
STOP/RESET
(-) button to set minutes.
f.
Press
MODE
(NEXT) button and press
START/SPLIT
(+) or
STOP/RESET
(-) button to set seconds.
g.
Press
MODE
(NEXT) button and press
START/SPLIT
(+) or
STOP/RESET
(-) button to select STOP AT END or
REPEAT AT END.
h.
When return to INT 1, press
START/SPLIT
(+) or
STOP/RESET
(-) button to change to INT 2 (Interval 2).
i.
Press
MODE
(NEXT) button then follow steps c to g.
j.
Press
SET/RECALL
(DONE) button to confirm and exit.
Interval Timer Operation:
a.
Press
MODE
button until INTTMR appears.
b.
Press
START/SPLIT
button to start INTERVAL TIMER.
c.
Press
STOP/RESET
button to stop INTERVAL TIMER.
d.
Press and hold
STOP/RESET
button to reset INTERVAL TIMER to pre-set value.
e.
Press
MODE
button to exit TIMER mode and return to Time-of-Day display.
NOTE:
When first countdown is complete, Timer proceeds to the next non-zero interval that is set. INDIGLO night-light flashes
and beep sounds between each interval.
If you set both Timers in interval Timer to repeat, Timer will countdown both intervals and then repeat the entire
sequence.