TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 4 of
6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide
Doc. No./Rev. 20170304
Recall Workouts:
a.
Press
MODE
button until CHRONO appears.
b.
Press
SET/RECALL
button to enter recall mode. Date of last workout flashes.
c.
Press
START/SPLIT
(+) or
STOP/RESET
(-) button to choose workout to view. Workouts are stored by date.
Multiple workouts maybe stored on same date.
d.
Press
MODE
(NEXT) to enter work out details.
e.
Press
START/SPLIT
(+) or
STOP/RESET
(-) button to review Lap/Split times of successive laps, BEST lap, AVG lap.
f.
To review other workouts, press
MODE
(NEXT) until date flashes then follow steps b to e.
g.
Press
SET/RECALL
(DONE) to exit.
NOTE:
To view lap/split times of current workout, while Chrono is running, press
SET/RECALL
and
START/SPLIT
(+) or
STOP/RESET
(-) button to scroll through lap/split times, BEST lap, AVG lap. Current lap will not be shown. No other
workouts can be viewed while Chrono is running.
Clear Workouts:
a.
With Chrono stopped, press and hold
STOP/RESET
button. HOLD TO CLEAR LAST WORKOUT appears.
b.
Watch will beep. Last stored workout is erased from memory.
c.
To clear all workouts, continue to hold STOP/RESET button. HOLD TO CLEAR CHRONO MEM appears. Watch
beeps a second time to indicate all stored workouts are erased. MEMORY 50 will be displayed.
2.4 TIMER
Timer Set-Up:
a.
Press
MODE
button until TIMER appears.
b.
Press
SET/RECALL
button. Hour digits flash.
c.
Press
START/SPLIT
(+) or
STOP/RESET
(-) button to increase or decrease HOUR.
d.
Press
MODE
(NEXT) button and press
START/SPLIT
(+) or
STOP/RESET
(-) button to set minutes.
e.
Press
MODE
(NEXT) button and press
START/SPLIT
(+) or
STOP/RESET
(-) button to set seconds.
f.
Press
MODE
(NEXT) button and press
START/SPLIT
(+) or
STOP/RESET
(-) button to select STOP AT END or
REPEAT AT END.
g.
Press
SET/RECALL
(DONE) button to confirm and exit.
Timer Operation:
a.
Press
MODE
button until TIMER appears.
b.
Press
START/SPLIT
button to start TIMER. Timer will continue to run if you exit Timer mode.
An alarm melody chimes when Timer reaches zero or before it starts to countdown again.
c.
Press
STOP/RESET
button to stop TIMER. Press again to reset.
NOTE:
For repeat Timer operation, repetition number appears at top right of screen in both countdown and interval timers.
Maximum number of repeats is 99.