TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 3 of
6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide
Doc. No./Rev. 20170304
2.3 CHRONOGRAPH
Chronograph Set-Up:
This determines what is shown in first and second Lines of the display.
a.
Press
MODE
button until CHRONO appears.
b.
Press and hold
SET/RECALL
button.
a.
If no workouts have been stored, display will read FORMAT then SET.
b.
If workouts have been stored, last workout will be displayed.
c.
Press
MODE
(NEXT) until format display appears.
d.
Press
START/SPLIT
(+) or
STOP/RESET
(-) button to select LAP/SPL (Split in large digits), SPL/LAP (Lap in large
digits), TOTAL RUN.
e.
Press
SET/RECALL
button to exit.
NOTE:
TOTAL RUN format allow you to view total elapsed time and total activity time (total activity time = total elapsed time –
time paused during workout).
Every time you pause/stop during your workout. Primary display will show time elapsed less paused time (total activity
time). Lower display will continue to run, showed total elapsed time since Chrono was started.
Press
STOP/RESET
to stop timing.
o
Press and hold
STOP/RESET
to clear or reset
Press and hold
SET/RECAL
L to store
o
When recalling TOTAL RUN, only total activity time will be displayed.
If you take a split, display will change to SPL/LAP, Elapsed time is not stored in memory.
Chronograph Operation:
a.
Press
MODE
button until CHRONO appears.
b.
Press
START/SPLIT
button to start CHRONO. Chrono continues to run if you exit the mode.
c.
Press
START/SPLIT
button to take a Split.
a.
Lap number alternates with last two digits of display.
b.
Display will freeze for 10 seconds. Press MODE button to release display and see running Chrono.
d.
Press
STOP/RESET
button to stop or pause CHRONO. Press
START/SPLIT
button to resume.
e.
When workout is completed, you have two options:
a.
Press and hold
SET/RECAL
L button to store workout.
b.
Press and hold
STOP/RESET
button to clear workout (both reset chrono to 00:00:00).
NOTES:
When storing a workout, display will indicate available free memory (number of laps remaining to be stored. Each
workout stored equals number of laps taken plus one extra lap to store total workout time) or MEMORY FULL.
If there is insufficient memory to store entire workout, total time, date, and the oldest laps will be stored up to
remaining capacity.