Timex Fitness Sensor, User Manual

Page: 6 / 112

9
Wearing the S+D Sensor on your upper arm
• Make sure that the belt clip is
removed. To remove the belt
clip, grasp clip with thumb in
bottom semicircular cutout
and forefinger on top tab.
Simultaneously push tab down
to release clip and push clip out
of the slot (Fig. 1).
• If the armband is not attached, make sure that the removable
cover is attached to the S+D Sensor. To attach the removable
cover, gently fit it around the S+D Sensor unit so that front of unit
(with Transceiver ON/OFF button) shows through cover opening.
Then rethread armband as shown in Figs. 2-5. Make sure the
side with the hook and loop closure faces the back of the S+D
Sensor case.
8
• Loosen adjustable armband and wrap
the Sensor around your upper arm.
• Pull armband so that it snugly fits around
your arm and fasten with the hook and
loop closure.
Wearing the S+D Sensor on your belt
• If attached, remove armband and
rubberized removable cover
(remove cover by pulling out and up
gently from both sides).
• Insert belt clip by sliding down into
slot on back of unit (Fig. 6).
Fig. 6
SLIDE
CLIP
DOWN
INTO
SLOT
Fig. 1
PUSH
DOWN
ON TAB
PUSH
CLIP UP
Fig. 2 Fig. 3
Fig. 4 Fig. 5