25
SC Board Installation
Units with MBX daughter board
See Figure 12.
____1) Install standoffs in place of 3 main board back screws
____2) Install the MBX board per MBX instructions except:
____3) Install front screw only
____4) Don’t install back screw now
____5) Place spacer on top of MBX board. See Figure 12.
____6) Carefully place SC board on the standoffs
____7) Place long (1/2”) screw in hole on left end of the SC
board, through spacer, through the MBX board and screw
it into the standoff below the MBX board.
____8) Install the other two screws in the SC board
____9) Plug all the connectors into the corresponding
connectors on the SC board. See Figure 13, Figure 14 &
Table 1.
Summary of Contents for PK-232SC
