9
K220
Record/USB2 Switch
The K210/K220 toggle switch controls whether the K210/K220
is recording (switch in the ‘On’
position) or whether it is connected to the PC (switch in the ‘Off’ position ).
LED Indicators
The K210/K220
has a number of LED’s to indicate certain conditions.
Record
– Indicates that the K210/K220 is currently recording.
Low Bat
– Indicates that the K210/K220 attached battery is low and will need charging soon
to avoid power down.
Memory Used
– Gives an indic ation as to how much of the K210/K220 hard disk is full of
recording
, LED’s will light at 25, 50, 75 and 100% full.
The K210/K220
LED’s can be software disabled by selecting ‘ LEDs Disabled’ in the
Advanced M enu of the K 210/K220 Configuration Utility. If this is selected then none of the
K210/K220
LED’s will light at any time which may be of use in covert applications.
RS232 Tx/Rx
–
For fut ure use. Currently no functionality in K210/K220.
