TLR401 Administration
21
5.10 Reset - Manually switch to Wiegand mode
This function allows you to reset the TLR401 to its factory defaults. All settings like the
changed Admin Code, the enabled Validation of the User ID will be affected. Users however
will remain untouched.
The reader will be set to Wiegand mode.
Admin
Mode
#
99
#
Green
1+2
Default Admin Code
1234
or enter your Admin Code
xxxx
#
Green
1+2+3
Enable
Wiegand
Mode
1
#
Device resets to all defaults
and
reboots
5.11 Reset - Manually switch to RS485 mode
This function allows you to manually set the TLR401 to RS485 mode. All settings will be
reset. The reader indicates its' offline status by the red flashing LED 4. The TLR401 will
automatically go online once it is connected via RS485 to a controller of the NEXTOR
series.
Admin
Mode
#
99
#
Green
1+2
Default Admin Code
1234
or enter your Admin Code
xxxx
#
Green
1+2+3
Enable
RS485
Mode
2
#
Device resets and signals its'
RS485
offline
status
