TLR401 Administration
14
5 Wiegand Configuration - Administrator Functions
With the exception of enrollment all administrator functions described in this section only
apply to the Wiegand configuration, i.e. connecting the TLR401 to the access controller via
Wiegand.
Administration of the TLR401 with Wiegand is done on the reader. The Fingerprint Key user
interface is comprised of the keypad, fingerprint reader and iCLASS reader as input devices
and the LEDs and beeper as output devices.
The administrator functions allow administrators to configure the operating modes and the
Admin code.
TIME
LINK delivers the device with the default Admin Code '1234'.
In addition to the Admin Code each device has a fixed access code. This code corresponds
with the device’s serial number, a 12-digit hexadecimal code, which is printed on the back of
the reader. The 12-digit code serves as a basis for calculating the access code if your
Admin Code is lost. In this case please contact
TIME
LINK.
5.1 Change the Admin Code
The default Admin Code is '1234'.
For security reasons it is advisable to change the Admin Code!
The Admin Code can be a 4-digit to 8-digit code.
Admin
Mode
#
99
#
Green
1+2
Default Admin Code
1234
or enter your Admin Code
xxxx
#
Green
1+2+3
Function
Menu
14
#
Green
1+2
flashing Beep
Change
Admin
Code
15
#
Green
2+3
flashing
Beep
(Default = 1234)
4
-
8
digits
# Green
1+2
flashing Beep
Finalize
by
3
x
#
###
or wait for Timeout
For security reasons the default Admin Code
should be changed. (see below)
neuen Code überschrieben werden.
