ECC NO. 1019
Page 1
73630 REV. C
Installation Guide
Micro Lynx ACG Option Card
TIMELINE VISTA, INC.
1755 LA COSTA MEADOWS DRIVE, SUITE B
SAN MARCOS, CA 92069
TEL. 760-761-4440
(FAX 760-761-4449)
DATE:
2/2/96
MODEL:
Micro Lynx
REVISION:
All
SERIAL NO:
All
SOFTWARE:
All
REQUIRED TOOLS:
Static safe workstation
Phillips screwdriver
Grounding wrist strap
1/4" Nut driver
REQUIRED PARTS:
TimeLine Part Number 71B008, ACG-1 Option Card, or
TimeLine Part Number 71B009, ACG-2 Option Card
PROCEDURE:
1. Turn off the power and place the Micro Lynx System Unit on a static safe
workstation. Ground yourself and the workstation anti-static mat.
2. On the back of the System Unit, remove the cover labeled
AUDIO CLOCK GENERATOR
.
3. Remove the six phillips screws securing the top cover to the System Unit.
4. Position the System Unit so that the front panel faces you, and remove the top cover.
Note:
Installation of the ACG Card is serial number dependent. For instructions on installing the
ACG Card, go to the section of this installation guide covering your Micro Lynx System Unit
serial number range
