•
Use the Setup Card and adhesive foam disks to keep track of
location buttons, until you can mount them in their final loca-
tions. Mount the buttons with the foam disks, the button
mounts, or both.
•
You will probably want to keep incident buttons in the button
wallet provided with the G
UARD
1 P
LUS
system. You can order
additional wallets and make duplicate sets as needed.
16
••
Set Up Your Buttons
Installation Guide
Method 2 - Reading buttons with T
HE
PIPE
Before using this method, you must
clear T
HE
PIPE.
1. Place T
HE
PIPE in the Direct
Downloader.
2. Select the System tab.
3. Right click on the PIPE you
want to clear.
4. Select
Clear
.
This method can be used when
buttons are already mounted in the
field, or with buttons you intend to
mount later.
