Mounting and Connecting the Keypad
A mounting template has been provided for your convenience. A detailed mounting
guide for the IPS125T is also available in the downloads section of
We recommend mounting the keypad with two #6 pan head screws and wall
anchors. Optionally, for rough environments, you may use four screws and wall
anchors. For walls that can not support screws, hook-and-loop fasteners, such as
Velcro brand adhesives, can be used.
The cable routing on the back of the keypad allows the keypad to be mounted
above, below or to either side of your TimeIPS IPS125T Network Clock.
Connect the USB cable to a free USB port on the back of the Network Clock.
If needed, a USB extension or USB hub can be used to extend the cable length.
Never use an extension cable if the total cable length will exceed 10 feet. (USB HID
devices are limited to 3M cable length.)
Note that it takes 10-15 seconds before the keypad will respond if plugged into a
running TimeIPS system. There is no need to shutdown the system to attach or
detach the keypad.
TimeIPS
http://support.timeips.com 316.264.1600
Page 7
