Connect The Cable
You must use the included USB adapter cable when connecting the
barcode reader to your TimeIPS system. Connect the USB cable to a
free USB port on the back of an LCD display, or directly to a USB
port on the back of a TimeIPS system.
If needed, a USB extension or USB hub can be used to extend the
cable length. Never use an extension cable if the total cable length
will exceed 10 feet. (USB HID devices are limited to 3M cable
length.)
Note that it takes 10-15 seconds before the swipe reader will respond
if plugged into a running TimeIPS system. There is no need to
shutdown the system to attach or detach the swipe reader.
TimeIPS
http://support.timeips.com 316.264.1600
Page 5
DB-9
Connector
Parallel
Port
Connector
USB
USB
Connector
