TimeIPS BAR-USB-SW Installation Manual Download Page 2

FCC Declaration of Conformity (DoC)

Compliance Information (according to FCC 2.1077)

(1) Product: BAR-USB-SW/BAR-USB-SWI

The above device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: (1) these devices may not cause harmful 
interference, and (2) these devices must accept any interference received, including 
interference that may cause undesired operation.

(2) The responsible party is TimeIPS, Inc. 5445 E 85

th

 St N, Valley Center KS, 67226.  Phone 

316.264.1600

Notice to Users

The components in this system have been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to 
provide reasonable protection against harmful interference in a residential installation.  The 
device generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, try to correct the interference by one or more 
of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet circuit other than the one to which the receiver is 
connected.

Consult the dealer or an experienced radio/TV technician for help.

These devices have been tested to comply with the limits for a Class B computing device, 
pursuant to FCC rules.  In order to maintain compliance with FCC regulations, shielded cables 
must be used with the equipment if not connected directly to the system.  Operation with 
unshielded cables is likely to result in interference to radio and television reception.

CAUTION: Changes and modifications made to the device without the approval of the 
manufacturer could void the user's authority to operate this device. 

Page 2

http://support.timeips.com  316.264.1600

TimeIPS

Summary of Contents for BAR-USB-SW









Reviews: