4
6.1 Ensure the mains supply is switched off and the circuit
supply fuses are removed or the circuit breaker is turned
off.
6. Installation
6.2 Using a Phillips screwdriver, separate the faceplate from the
back box by removing the four tapped screws located in each
corner.
6.3 Using the back box as a template mark the position for the
holes. Note the back box must be mounted in the correct
orientation, following the ‘TOP’ marking inside the back box.
If the mounting position desired is uneven use a sheet of
marine ply as a base plate and fit the back box.
ON
WiFi
Tapped
Screws