6. First Supply Connection and Reset
7. Setting the Date and Time of Day
7.1 Initially Setting the Date and Time of Day
The reset button is recessed to achieve a degree of tamper proofing and an
implement such as a pen, pencil or matchstick will be required to operate it.
From first connection to the supply allow the internal battery to charge up for 4 hours
followed by pressing the reset button. Otherwise, if the battery is sufficiently well
charged, press the reset button immediately. In either case the display will initially
show the full character set then display:-
The only button which is now active is the time button. Now proceed to setting the
date / time and then programming the ON and OFF times.
Press the ‘Time’ button and hold for approx. 2 seconds. Whilst holding, the word
‘HOLD’ will show bottom left in the display.
After the 2 seconds the default year, (2009) will be diplayed:-
Use ‘Adv’ (increment) or ‘Bst’ (decrement) to change the display to the correct year.
The limit calendar year is 2050.
Year
Prog
Adv
Time
Bst
SET
Press the ‘Time’ button and the month digits will flash:-
Use ‘Adv’ or ‘Bst’ to set the month.
Month
Prog
Adv
Time
Bst
SET
Prog
Adv
Time
Bst