Timeguard SupplyMASTER FST11A Installation & Operating Instructions Manual Download Page 3

2. Battery

The unit has an in-built non replaceable, rechargeable battery, which will keep the 
programmed times during power down situations for up to 4 weeks. If the main 
switch is left in the OFF position for longer than this, the display will go blank. If the 
screen goes blank, once power is restored and 4 hours elapsed (to give a working 
battery charge) reset must be pressed, and times / programmes re-entered.

Supply live 
terminal

Switched 

neutral terminal 

(load neutral 

connection)

Supply neutral 

terminal

Switched live terminal 

(load live connection)

3. Applications

Energy consuming appliances such as immersion heaters and storage heaters up to 
13A total loading can be supplied by the FST11A / FST17A enabling users to make 
use of economy 7.

If the user has other appliances which do not have a push button start such as 
washing machines, dishwashers and tumble dryers these may also be controlled in 
the same way. It can also be used to control lighting, if a neutral is made available. 
Lighting up to 2.5kw filament, or 500W fluorescent can also be controlled.

230 V~
13A

T40

L OUT

N IN

L IN

N OUT

Fig. 2 
FST17A / FST11A Rear Connections

Summary of Contents for SupplyMASTER FST11A













Reviews: