3
4
4. Installation
Mounting
4.1 Ensure the mains supply is switched off
and the circuit supply fuses are removed
or the circuit breaker is turned off.
4.2 If the unit is to be permanently fixed
to a wall/joist or ceiling:
a) Using the unit as a template mark the
position of the fixing holes.
b) Drill the holes for the rawl plugs ensuring
not to infringe on any gas/water pipes
or electrical cables that may be hidden
below the surface.
c) Insert the correct rawl plugs for the
drilled holes.
d) Fix the unit using the correct mounting
screws for the rawl plugs installed.
Terminal Connection
4.3 Loosen the captive fixing screws located
on the top of the unit, so you can open
the hinged terminal cover revealing the
wiring terminals.
