12
11. Troubleshooting
Problem
• Lamp stays ON
all the time
night and day.
Solution
The unit may be suffering from false activation.
Cover the sensor lens completely with a thick
cloth. This will prevent the sensor from “seeing”
anything. If the unit now switches off after the
set time duration and does not re-activate, this
indicates that the problem was caused by false
activation. The problem may be solved by slightly
adjusting the direction/angle of the sensor head
(See section 4. Selecting a location).
10. Holiday Mode Operation
• Flick the isolation switch at day or night, OFF/ON within 3.5 seconds
to activate the Holiday mode. The PIR will then be set to operate
your lamp each night.
• The unit will now illuminate continuously until dawn, or until the unit
is switched back into auto mode.
3.5 SEC
x3
• To manually return to Auto Mode, flick the isolation switch OFF/ON once
within 1.5 seconds.
