8
• Press the ‘Change’ button to select the minutes
you require for the programme.
• Press the ‘Program’ button to confirm the
minutes for the ON time and move on to setting
programme 2 ON.
• Repeat the steps from section 7.4 ‘Programme 1
ON time’ for additional programmes if required.
Note: The 24 hour models have 4 programme
memory slots, and the 7 day models have
6 programme memory slots.
• If you wish to exit the program mode at anytime,
press and hold the ‘Program’ button until you
are back at the current time.
• IMPORTANT: Once programming has been
completed, the unit will show an OFF status by
default. If you require power output now, press
the ‘CHANGE’ button once. This will override the
unit until the next programmed OFF time.
If you do not do this, the unit will simply turn ON
at the next scheduled ON time (even if this is the
following day).
7.5 Program Review
When in operating mode press the ‘Program’ button
for 3 seconds and the clock symbol, hours and
minute’s symbol on the display will flash, this is
