6
7.3 Setting Clock & Programming
After Reset
• To clear the memory and reset the unit press hold
down the ‘Change’ and ‘Program’ button until the
display goes blank.
• Release both of the buttons. After a few
seconds the display will show the clock with
the hour digit blinking.
• For the 7 day version there will be a dot flashing
over number 1 which is Monday and 7 being
Sunday. Press the ‘Change’ button to select your
current day. Once this is complete press the
‘Program’ button to move to setting the clock.
You are now in the clock setting mode at
the beginning of the programme sequence
• To set the hour for the clock press the ‘Change’
button to advance the hour setting. For a rapid
change of the hour setting hold down the ‘Change’
button and release when the correct hour value
is selected.
• Press the ‘Program’ button once and the minutes
will flash, press the ‘Change’ button to advance
the minutes setting to the correct value required.
Again you may hold down the ‘Change’ button for
a rapid change of the minutes if you wish to do so.
