10
4. Battery
A battery is provided with the following control units and kits
- EACP1PR, EASSCP1PR, EACP4PR or EASSCP4PR and cannot
be fitted to other types.
To fit the battery remove it from the holder and turn it round
and offer it up to the connector and after correct polarity is
ensured press the battery into the connector.
The battery takes 48 hours to get to full charge from when first
connected to the control unit and mains voltage applied to the
L and N terminals.
An illustration of full reserve capability is as follows:
Single zone system
Typically 4 days on standby with
2 hours continuous alarm.
Four zone system
1 day on standby with 30 minutes
continuous alarm (1 zone only).
Caution. Danger of explosion if battery is
incorrectly connected. Replace only with same
type of NIMH rechargeable battery.
Important.
Ensure battery is inserted with correct
polarity. Do not force battery onto contacts.
Battery Disposal
When battery has reached end of useful life insulate terminals
and consult your local authority about disposal.
DO NOT DISPOSE OF IN FIRE.
