More on menus
Each menu allows further customisation of your Timecode Buddy: wifi
master.
Timecode mode.
Choose from five settings:
• Int Gen.
Activates the highly accurate internal generator. From here
you can set your own T/C, user bits and FPS settings.
• Ext RF.
Constantly jam syncs the internal generator from the
received T/C via Buddy DataLink. If Buddy loses signal of received
T/C, the T/C output continues using the internal generator for five
seconds then freezes.
• Ext RF (cont).
Constantly jam syncs the internal generator from the
received T/C via Buddy DataLink. If Buddy loses signal of received
T/C, the T/C output continues using the internal generator.
• Ext BNC.
Constantly jam syncs the internal generator from the
received T/C via the BNC I/P socket or LEMO 5 socket. If Buddy
loses signal of received T/C, the T/C output freezes immediately.
• Ext BNC (cont).
Constantly jam syncs the internal generator from
the received T/C via the BNC I/P socket or LEMO 5 socket. If
Buddy loses signal of received T/C, the T/C output continues using
the internal generator.
Internal generator.
Choose from:
• Set timecode.
Turn to set flashing digits, press to enter, repeat
for each pair.
• Set user bits.
Turn to set flashing digits, press to enter, repeat for
each pair.
• Set FPS.
Set to 25, 23.98, 24, 29.976, 29.976DF, 30, or 30DF.
RF settings.
From here select:
• Channel no.
1 to 14
• RF TX On/Off.
When in Internal or BNC modes the Timecode
Buddy: wifi master can transmit its SMPTE timecode data via Buddy
DataLink to any other Timecode Buddy: wifi master listening on the
same channel.
Timecode Buddy Manual
page : 6
