Buddy: webview
Your Timecode Buddy: web view should open in any browser, giving
you access to all instructions and setting information wherever you are.
Three simple steps activate this feature:
1. Turn on Buddy WiFi and choose ad-hoc mode. Wait until display
flashes ‘WiFi Connected.’
2. Take any WiFi enabled device with a browser and scan wireless
networks for ‘TCBuddyxxx’.
3. When connected type the IP address of your Timecode Buddy:
master into the address bar of the browser e.g. 169.254.xxx.1 (xxx is
the number of the Buddy chosen).
4. If you are connected to the Timecode Buddy: app or the
app then Timecode Buddy: web view is available from
a quick launch button directly from app.
Home.
Shows the Timecode Buddy
you’re connected to:
Buddy settings.
Displays status and
settings of the Timecode Buddy:
wifi master.
Configure WiFi.
Scan for available wireless networks, type in the
network key, and join an infrastructure network for firmware updates to
the Timecode Buddy: wifi master and Timecode Buddy: tx.
Timecode Buddy Manual
page : 8
