UK Timecode Systems Ltd. Unit 6, Elgar Business Centre, Moseley Road, Hallow, Worcester.
WR26NJ. UK
Integration Instructions
2.2 List of applicable FCC / ISED rules
FCC:
ISED:
47CFR 15.247
RSS-247
2.3 Specific operational use conditions
Not applicable
2.4 Limited module procedures
Not applicable
2.5 Trace antenna designs
Not applicable
2.6 RF exposure considerations
To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas are
installed which are listed with this module antenna details. The AirGlu2 module should be used in
such a manner that the potential for human contact during normal operation is minimized.
OEM integrators and end users must be provided with transmitter operating conditions for satisfying
RF exposure compliance.
Radio frequency radiation exposure Information: this equipment complies with FCC radiation
exposure limits prescribed for an uncontrolled environment for fixed use conditions. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter except in
accordance with FCC procedures and as authorized in the module certification filing. Changes or
modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
2.7 Antennas
The external antenna approved for use is the Taoglas TG.09.0113 SMA (F) monopole. The maximum
Gain (free space) allowed is 2.0 dBi (900MHz) and -6dBi (2.4GHz). No other antenna type or higher
gain of antenna design should be used. The unique antenna connection used on the AirGlu2 module
is the ECT (Electric Connector Technology Co Ltd) part no. 818000157.
2.8 Label and compliance information
The host product manufacturer is responsible to provide physical or e-
labelling stating ‘Contains FCC
ID: AYV-AGLU02 or Contains IC: 10427A-AGLU02
’ with the
finished product. See Guidelines for
Labeling and User Information for RF Devices
–
KDB Publication 784748.
2.9 Information on test modes and additional testing requirements
The AirGlu2 module comes complete with a Test Mode API within the core operation firmware, to
configure all required test modes as a standalone transmitter in a host
2.10 Additional testing, Part 15 Subpart B disclaimer
The AirGlu2 modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC
transmitter rules) listed on the grant, and that the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant
