Connecting your Smart Socket to WiFi
1.
Plug your Wifi Smart Socket into an electrical socket and Switch it on.
2.
Open up your SuperConn app and select the + Icon on the top right of the
App to add device.
3.
Select “Plug” as the Device Type. The App can also be used to control other
compatible Smart Devices.
4.
To connect the Smart Socket to your WiFi
ensure the blue LED light on the Smart
Socket is flashing quickly. When the LED
light flashes quickly (twice a second) the
device is in Config mode which allows you
to connect.
Select “Finish Network Configuration” when the
blue LED is flashing quickly.
5.
If the blue LED light isn’t flashing quickly when
you’ve plugged in your Smart Socket keep the
Power button in the centre of your WiFi Smart
Socket pressed for 5 seconds to reset the device.
