Full Technical specification available upon request. Contact [email protected] for PDF.
Ambient 40W LED 12V Driver
Cleaning:
• Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the driver.
Warning:
• This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing.
Irreparable damage will occur if this instruction is not followed.
Warranty:
• This product is warranted to be free of defects in materials, design and workmanship for 1 year from the date of
purchase (conditions apply, please see TIME LED website for further details). If a suspected fault should develop in this
time, please contact us via the address on the front.
Recycling Advice:
Waste Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Product Code
781234
Size (mm)
160x20x58
Watts
40W
Input Frequency
50Hz
Voltage
170-265V
Hertz
50Hz
Current
3.33A
Power
40W
Power Factor (PF)
0.9
Material
PC
IP Rating
IP20
Warranty
1 Year
Installation:
• Provide power to the required point of installation.
• Connect the LED driver to the mains supply, ensuring the correct polarity is observed: Live = brown, Neutral = blue.
• Connect a suitable LED load to the secondary side of the driver, ensuring the correct polarity is observed: Red to
positive (+) and Black to negative (-).
• Ensure cable strain relief is securing the cables effectively.
• Switch on power supply and check for correct operation.
