2
Parts included
• Remote Light Control Tx and wall plate.
• Instruction manual. Please keep safe for future
reference.
• Accessory Pack
• 1 x CR2032 “coin cell” lithium battery.
Tools and parts needed
• Electric/hand-held drill & bits.
• Terminal or Electricians screwdriver
Selecting a location
This transmitter unit can be used in conjunction
with the wall plate included, this must be
mounted within 100m (free air space) of the
receivers it is to be used with. It can be used hand
held again within 100m.
Pressing the ‘1’ button brings a previously
programmed Rx units light on continuously and
pressing the ‘O’ button turns the light off.
(Rx waiting for a PIR transmission to turn on again).
C
Battery
Battery
Holder
Keyring Slot
LED
OFF
ON
D
C
iTLTK2_Instructions.qxd 28/4/06 3:57 pm Page 2
