Timberwolf TW 230HB (Diesel), Instruction Manual

Page: 34 / 62

5.15 Check Hydraulic Oil Level
The hydraulic oil level is visible through the
side of the tank. The level should be between
the 'Max' and 'Min' markings on the tank
(Figure 17).
To replenish, refer to Section 6.11 " Change
Hydraulic Oil and Filter" on page 45.
Figure 17 - Hydraulic Oil Level Indicator
5.16 Check Fuel Level and Refuel
Always follow standard Health and Safety procedures.
The fuel level is visible through the side of the tank. To replenish, follow this process:
• Stop the engine and allow it to cool before refuelling.
• Never smoke or allow naked flames nearby while refuelling.
• Store fuel away from vapour ignition sources such as fires or
people smoking.
• Never refuel at the operating location, move to a distance > 10 m to avoid creating fire
hazards.
• Fuel storage containers must not be transported in the feed funnel.
• Fuel storage containers must be approved for appropriate fuel storage and clearly
labelled, with securely fitting caps.
• Clean the area around the fuel cap and use a funnel for refuelling. Replace the fuel
cap securely.
• Avoid skin contact with fuel. If fuel enters the eyes, wash out with sterile water
immediately and seek medical advice as soon as possible.
• Always clean up spillages quickly. If fuel is spilt on clothing, change clothes before
returning to the work area.
32/59 C190-0302 - Rev 1.0 EN
TW 230HB (Diesel) 5 Operating Instructions