Timberwolf TW 160PH, Instruction Manual

Page: 17 / 55

TW 160PH
SERVICE INSTRUCTIONS
14 / 51
C190-0013 11.04.2019
NOTE: Your Timberwolf woodchipper is covered by a full 12 months parts and labour warranty. Subject to
correct maintenance and proper machine usage, the bearings are guaranteed for 12 months regardless of hours
worked by the machine. In conditions of 'heavy usage' - i.e. in excess of 500 hours per year - it is recommended
that the bearings are changed annually to ensure that the machine retains optimum working performance.
SERVICE SCHEDULE
Daily
Check
50
Hours
100
Hours
500
Hours
1
Year
Check engine oil - top up if necessary (10W-30).
ü
Check for engine oil / hydraulic oil leaks.
ü
Check fuel level.
ü
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
ü
Check blades
ü
Ensure engine air intake is free from leaf build up.
ü
Check tyre pressure is 2.2 Bar (32 psi).
ü
Check safety bar mechanism.
ü
Grease the roller box slides.
ü
OR AS REQUIRED - SEE PAGE 20
Grease the roller spline and bearing.
ü
OR AS REQUIRED - SEE PAGE 20
Clean air filter element. DEPENDING ON WORKING ENVIRONMENT
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
ü
Grease discharge flange.
ü
Check tension of main drive belts (and tension if
necessary).
ü
Check anvils for wear.
ü
Check fuel pipes and clamp bands.
ü
Check battery electrolyte level.
ü
Check for loose electrical wiring.
ü
Replace hydraulic oil filter - every year or 100 hours
after service or repair work to the hydraulic system.
ü
OR
ü
Replace hydraulic oil.
ü
OR
ü
Replace fuel pipes and clamp bands.
REFER TO YOUR ENGINE
SUPPLIERS MANUAL
Check spark plugs.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils when worn. RETURN TO DEALER FOR ANVIL CHANGE
Axle maintenance.
REFER TO SUPPLIERS INSTRUCTION SHEET
Tow head maintenance.
SERVICE SCHEDULE
WARNING
ALWAYS IMMOBILISE THE MACHINE BY STOPPING THE ENGINE, REMOVING THE
IGNITION KEY AND DISCONNECTING THE BATTERY BEFORE UNDERTAKING ANY
MAINTENANCE WORK.